This video explains how to download the latest version of LinMot Talk for configuring your LinMot Drive!
This video covers the procedure used to log in to various LinMot Drives with LinMot Talk using ethernet communication.
This video discusses how to install new firmware onto your LinMot Drive.
This video shows how to go through and complete your motor wizard to prepare your LinMot drive to properly communicate with your motor. This is important for properly setting the Motor Configuration Parameters within your drive.
In this video, we will go over how to make your first move with your LinMot motor. Prior to this, you will need to download LinMot Talk, login to the drive (probably over RS232), and complete the motor wizard.
This video walks through how to import a configuration file to your drive using LinMot Talk 6.9
This video covers the basic tuning process and where the parameters can be found.
This video covers some troubleshooting steps that can be taken if the firmware on a LinMot drive has been corrupted.
In this video, we examine how to interpret, diagnose, and clear errors in LinMot drives.
A tutorial on using Time Curves with LinMot Drives.
This short video in a series of instructional videos produced by LinMot walks the user through setting up discrete input and output using LinMot Talk. Part 1 focuses on the inputs.
This short video in a series of instructional videos produced by LinMot walks the user through setting up discrete input and output using LinMot Talk. Part 2 focuses on the outputs.
This video goes over downloading EasySteps in LinMot Talk and mentions some of the benefits of using it.
This video goes over how to set up an analog input to control a parameter using EasySteps in LinMot Talk.
This video discusses how to set up I/O using EasySteps and explains some of the advantages of doing so.
LinMot Talk Configuration – Command Table: Continuous 2-position Motion
inMot Talk Configuration – Command Table: If Conditions
Command Table: X4 Interface Outputs with Mask
This video goes over how to install an access key for the protected technology function of closed loop force control and the set up of the load cell parameters in LinMot Talk 6.9. The access keys are linked to the drive’s serial number and only work with the drive they are assigned to.
This video covers the closed loop force control motion commands.
LinMot Talk Configuration – Basic Oscilloscope Features
This video describes logging in through Ethernet/IP and is a feature only available on the E14x0, E12x0, and the C1250 Ethernet/IP drives
This video shows how to log into a LinMot drive using the USB-RS232 Converter product number 0150-2473.