Configuration

Downloading LinMot Talk

This video explains how to download the latest version of LinMot Talk for configuring your LinMot Drive!

Logging Into LinMot Talk

This video covers the procedure used to log in to various LinMot Drives with LinMot Talk using ethernet communication.

Downloading Firmware

This video discusses how to install new firmware onto your LinMot Drive.

Motor Wizard Walkthrough

This video shows how to go through and complete your motor wizard to prepare your LinMot drive to properly communicate with your motor. This is important for properly setting the Motor Configuration Parameters within your drive.

Your First Move

In this video, we will go over how to make your first move with your LinMot motor. Prior to this, you will need to download LinMot Talk, login to the drive (probably over RS232), and complete the motor wizard.

Saving a configuration file

Importing a config file

This video walks through how to import a configuration file to your drive using LinMot Talk 6.9

Basic PID Tuning

This video covers the basic tuning process and where the parameters can be found.

Recovering from a corrupt firmware installation

This video covers some troubleshooting steps that can be taken if the firmware on a LinMot drive has been corrupted.

Interpreting Errors

In this video, we examine how to interpret, diagnose, and clear errors in LinMot drives.

Time Curves

A tutorial on using Time Curves with LinMot Drives.

Discrete IO Part 1: Inputs

This short video in a series of instructional videos produced by LinMot walks the user through setting up discrete input and output using LinMot Talk. Part 1 focuses on the inputs.

Discrete IO Part 2: Outputs

This short video in a series of instructional videos produced by LinMot walks the user through setting up discrete input and output using LinMot Talk. Part 2 focuses on the outputs.

EasySteps Part 1

This video goes over downloading EasySteps in LinMot Talk and mentions some of the benefits of using it.

EasySteps Part 2

This video goes over how to set up an analog input to control a parameter using EasySteps in LinMot Talk.

EasySteps Part 3

This video discusses how to set up I/O using EasySteps and explains some of the advantages of doing so.

Command Table: Continuous 2-position Motion

LinMot Talk Configuration – Command Table: Continuous 2-position Motion

Command Table: If Conditions

inMot Talk Configuration – Command Table: If Conditions

X4 Interface Outputs with Mask

Command Table: X4 Interface Outputs with Mask

Force Control – Part 1

This video goes over how to install an access key for the protected technology function of closed loop force control and the set up of the load cell parameters in LinMot Talk 6.9. The access keys are linked to the drive’s serial number and only work with the drive they are assigned to.

Force Control – Part 2

This video covers the closed loop force control motion commands.

Basic Oscilloscope Features

LinMot Talk Configuration – Basic Oscilloscope Features

Logging in through Ethernet/IP and Other Features

This video describes logging in through Ethernet/IP and is a feature only available on the E14x0, E12x0, and the C1250 Ethernet/IP drives

Logging in over RS232

This video shows how to log into a LinMot drive using the USB-RS232 Converter product number 0150-2473.