﻿Id;Default
304;
11076;$T$TFast
10293;$T$TModerate
4918;$T$TSlow
5473;$T     Fast
10862;$T     Moderate
5496;$T     Slow
10963;$T    Fast
8891;$T    Moderate
4173;$T    Slow
5069;$Tfast
6538;$TFast
11177;$Tmoderate
10635;$TModerate
362;$Tslow
8410;$TSlow
1684;             %s
2467;             User
2630;            User
242;           %s
1106;           User
1437;         %s
800;         Also Selectable
2832;         Final Alternative
1154;         Gripping
333;         Menu 1
2764;         Multiple Axis
2128;         Multiple Axis System
3473;         Robotics
3742;         Robotics Parameters
2468;         Second Selection
2301;         System Info
955;         TBD
2425;         Third Option
2737;         Vision
696;      %s
2840;    %s
11129;   %s
957;   Command Table
5684;   Program Variables
541;   todo: Pfad
3780;   User Alarm
312;  %0.2f s
987;  %1.1f %
498;  %s
3379;  %t[m$'m $'s$'s$']
3702;  %t[mm$'m$'ss$'s$']
1381;  %t[ms] ms
1462;  %t[s$'s $'ms$'ms$']
2728;  %t[s$'s$']
12288;  Actual Value
1035;  BetterTabs
2318;  Camera Name
3151;  Command Table
9315;  Connection
9910;  Current State
958;  Debugging
10533;  Device Nr.
653;  Enabled Libraries
10391;  Forced
7345;  IPv4
349;  Library Settings
2625;  Login / Switch User
926;  Monitoring
3244;  Name
7439;  Password
1792;  Program Variables
809;  Run Control
622;  Settings
4562;  Settings 1
1426;  Settings 2
355;  Settings 3
3697;  Settings 4
657;  Settings 5
3068;  Settings 6
2390;  Settings 7
1105;  Settings 8
4774;  Settings 9
989;  Telnet Port
215;  User
9570; %i
1078; %s
1460; %s:
4942; + Add User
729; A
2114; Actions
1730; Actual Value
7745; Actual Value on Bus
5070; Axis Name
7197; B
12764; Bit Name
5874; C
9259; Camera Name
1567; Configured Axis
11956; Caption
37; Channel
5413; Connection
11000; CoordSys Name
2880; Current Position
9600; Current State
9483; DataRef
9917; DataRef Mapping
3543; Date Modified
5971; Default
7860; Default on Start
8096; Default Parameters
9869; Delete user
8046; Detected Axis
9488; Default Value
9082; *
305; Description
1635; Device %i
10197; Device Nr.
12910; Digital Input X4.4
8527; Digital Input X4.5
11912; Digital Input X4.6
3309; Digital Input X4.7
12366; Digital Input X4.8
5249; Digital Inputs
11313; Digital Output X4.3
5497; Digital Output X4.4
5186; Digital Outputs
2329; Drive Nr.
7665; Enable Input
11238; Enable Output
2186; Filename
10122; Force
6188; Forced
7404; Home Position
13542; Homing Order
320; Homing Procedure
7617; Initial Position
1508; IPv4
7997; Jogging
2096; Manual Homing
274; Max. Position
11042; Min. Position
8049; Monitoring Channel
7055; Monitoring Channels
1577; Motor Changed
6976; Name
10975; Newly Assigned Axis
5177; Numbers
7895; Numbers & References
8686; Operations
7795; Order
4851; Parameter
2184; Parameter Channels
3433; Password
4240; Pos. Moving Direction
3536; Power
3494; Scan Devices
8660; References
2419; Telnet Port
5855; Type
8290; UPID
12686; User
897; Usergroup
11253; Usergroups
9608; Username
10143; Var Name
6155; Values
7093; Variables
11720; X
12789; Y
3436; Z
659;#
4802;#Row
12042;$$AUTOSIGNIN$$
4753;$$CANCEL$$
179;$$LOGIN$$
816;$$PASSWORD_PH$$Password$$
604;$$SYS_ERROR$$
4745;$$USERNAME_PH$$Username$$
1582;%
8589;% 4.2f
5943;%&s
3187;%-2.2f
4367;%-4.2e
988;%-4.2f
7182;%-f2.2
11577;%.0f %
2248;%.0f mm
9494;%.0f mm/s
471;%.0f% %
3291;%.0f%%
1530;%.1f cycles
4952;%.1f m/s
4087;%.1f mm
7465;%.1f%%
6837;%.2f
5281;%.2f k°/s²
7290;%.2f k°/s³
10256;%.2f m/s
11418;%.2f m/s²
10690;%.2f m/s³
2503;%.2f °/s
2825;%.2f °/s²
1914;%.2f °/s³
5549;%.3f
2260;%0.0f ms
3317;%0.0f °/s^3
6903;%0.1f
881;%0.1f %
4517;%0.1f k°/s^2
1714;%0.1f k°/s^3
1708;%0.1f m/s^2
565;%0.1f m/s^3
8170;%0.1f mm
1251;%0.1f mm/s^2
1611;%0.1f mm/s^3
2566;%0.1f °/ms^2
1887;%0.1f °/ms^3
1591;%0.1f °/s^2
2594;%0.1f °/s^3
487;%0.2f
1495;%0.2f %
1032;%0.2f mm
749;%0.2f ms
1478;%0.2f N
3684;%0.2f °/s
4555;%0.2f%%
1780;%0.2f°
519;%0.3f
3204;%0.3f m/s
5925;%0.3f m/s^2
4278;%0.3f m/s^3
5793;%0.3f mm
4236;%0.3f °/s^2
2283;%0.3f°
2328;%0.4f
1487;%0.4f m/s
1537;%0.4f m/s^2
2302;%0.4f m/s^3
62;%0.4f mm
211;%0.4f mm/s^2
2143;%0.4f mm/s^3
53;%0.4f °/ms^3
2323;%0.4f °/s^3
29;%0.4f°
835;%0.5f m/s^2
409;%0.5f °/ms^2
345;%0.5f °/s^2
317;%0.6f m/s
1393;%0.6f °/ms
717;%0.6f °/s
4524;%0.f mm
10188;%04x
6156;%04X
748;%04Xh
9773;%08X
2535;%1.1f cycles
6665;%1.3f
618;%1.3f s
4462;%2.1f %%
3245;%2.1f A
3592;%2.1f °C
3330;%4.2f 
4791;%2.2f
2992;%2.2f u
4825;%4.2e
4607;%4.2f
7601;%4.2f 
5953;%4.2f mm
3443;%d
1424;%f
6578;%f cycles
1902;%f mm
936;%f s
1753;%f strEntryTitle
630;%f °/s^3
51;%i
762;%i ms
11130;%i/500
2444;%i¨
0;%s
2819;%S
523;%s %
8916;%s cycles
123;%s mm
1150;%s:
5127;%t
13499;%t[$'s$'s$']
11946;%t[dd.MM.yyyy %t[HH:mm:ss]
3717;%t[dd.MM.yyyy HH:mm:ss]
2693;%t[dd.MM.yyyy HH:mm]
10790;%t[dd.MM.yyyy]
1120;%t[ddd MMM dd.MM.yyyy HH:mm:ss]
2792;%t[ddd MMM dd.MM.yyyy HH:mm:ss] [Date&Time]
9575;%t[HH:mm:ss]
7965;%t[m$'m $'s$'s$']
3058;%t[ms] ms
6195;%t[s$'s$']
9200;%u
8722;%u 
2817;%W
2716;%w
3686;%X
850;%x
4031;&s
424;$'Adds a Multiple Axis Motion of 2 to 3 axes. Goal positions, velocities, accelerations, decelerations and jerks for each axis can be defined seperately. Allows for synchronized (all axes move with the same velocity profile) and asynchronous (each axis moves as fast as specified) motions.$'
7288;$'bla bla$'
6719;$'IP_Buttons.AddRow_l$'
9114;$'IP_Buttons.CloseAll_l$'
6723;$'IP_Buttons.Comment_l$'
6705;$'IP_Buttons.Copy_l$'
6700;$'IP_Buttons.Cut_l$'
4602;$'IP_Buttons.Delete_l$'
4596;$'IP_Buttons.DirNew_l$'
4599;$'IP_Buttons.DirUp_l$'
2204;$'IP_Buttons.Download_l$'
11113;$'IP_Buttons.Edit_l$'
10361;$'IP_Buttons.Information_l$'
3798;$'IP_Buttons.Load_l$'
6709;$'IP_Buttons.Paste_l$'
12761;$'IP_Buttons.Ruler_l$'
9096;$'IP_Buttons.SaveAll_l$'
9102;$'IP_Buttons.SaveAs_l$'
9090;$'IP_Buttons.Save_l$'
12379;$'IP_Buttons.Start_l$'
6728;$'IP_Buttons.UpdateDescr_l$'
2202;$'IP_Buttons.Upload_l$'
13977;$'IP_CommandInfos.GripForce_l$'
13986;$'IP_CommandInfos.Ungrip_l$'
9108;$'IP_General.Cross_l$'
11105;$'Label_HasFinished$'
3133;$'Label_HasStarted$'
6797;$'SAVE$'
3186;(De-)sync Conveyor
2124;(hidden)
3870;**
1392;*
7374;***
3248;*****
5222;******
5193;********
192;+
5;+/-
887;-
7888;- %s
1081;-%2.1f %
1787;.
4702;/ 0.25 V
5388;/ B23h
1176;0
1342;0.1
2920;0.25 V
883;0.7
6933;1
766;1.8.5.4
678;135
1155;15.23
7044;1: %s
7514;1: STR
2075;1: STR$; 2: INT, 3: LREAL
10577;1x1
2466;1x2
1831;2
4612;2 Pos Enable
4336;2: %s
10205;2x1
5097;2x2
9012;3
5205;34.5
1056;3: %s
6093;3x3
5631;4
4472;4: %s
11;5
10050;5: %s
12;6
5643;6: %s
1793;7
4134;7: %s
14;8
9890;8: %s
15;9
4643;: %s
1652;<=
568;>
444;>=
1464;A
1061;A. Status:
703;A: %0.2f°
1978;A: %0.4f°
6322;Abort Label:
694;Absolute
810;Absolute Pos.
10420;Absolute Position
633;Acc:  %2.2f u/s^2
69;Acceleration:
3100;Ackn. Password
2511;Ackn. Password:
2931;Act. Cur: 
1555;Act. Current
3424;Act. Frc/Trq:
1225;Act. Frct./Trq.:
2559;Act. Pos:
1082;Act. Row
5817;Act. Value
359;Active
3677;Active Command Table:
4586;Active Labels:
2515;active User
4164;Active User:
7767;Actual Value
6436;Add
4007;Add entry at selected row
861;Add new user
1334;add or edit Via Points
839;Add user
7295;Add User
92;Advanced Options
3369;App
4910;App Control Page
2109;Arrived
1468;asdf
2973;Assignement
641;Asynchronous
10649;Auto
785;Auto-Load CT
7492;Auto-Lock in %t[s$'s$']
7320;Auto-Lock: %t[s$'s$']
2922;Auto-Logoff
1387;Auto-Logoff Time:
3914;Auto-Logoff User
1250;Auto-Logout Time:
3561;Auto-Logut
2560;Auto-Run Default Program At Startup
1568;Auto-run default program at startup
3945;Auto-Start CT
3749;Automatic User Logout
3688;Automatic User-Logout
992;Automatically change from DEVELOPER to USER after a certain time.
22;Axes are not ready to operate
1400;Axes are ready to operate
1298;Axis
430;Axis 1
4254;Axis 2
2871;Axis 3
2077;Axis are not ready to operate
206;Axis are ready to operate
196;Axis Name
932;Axis name
2415;Axis:
13229;B23h
5482;B: %0.2f°
1396;B: %0.4f°
4639;Back
3118;Backup
4777;Backup_hidden
306;Beckhoff I/O Package 16/16
1074;Beckhoff I/O Page
10484;Bit Name
5132;bla bla
899;Bottle_Handler
3650;Button name FALSE:
737;Button name TRUE:
3142;Button TRUE:
10410;C1250-MI-0S
3983;C: %0.2f°
3020;C: %0.4f°
1046;Call and execute a different Command Table File
2105;Call Subprogram
461;Camera Name
3033;Camera name:
1807;Camera:
3726;Cancel
948;Capping Function Package
376;Capping Function Package Page
2821;Caption
787;Cartesic Tab
7440;Category
3017;CellSize: %i
11488;change logouttime
790;Change or delete user data
583;Change or delete user data - Runtime based
3251;Change password
278;Change password on first login:
2305;Change user data
4258;Change User:
8537;Channel
3063;Check Camera State
873;Check Connections
991;Choose a Widget
8847;Clear
5647;Click
6390;Close
5936;Close all programs
3074;Close dialog
707;Close selected program
870;Cognex Camera Interface
251;Cognex Camera Interface Page
414;Com
8611;Coming Soon...
4182;Command
1011;Command Page
2599;Command Table
4238;Command Table is paused
2657;Command Table is running
2095;Command Table Page
4189;Command Table Settings
1751;Command Table System
677;Command:
7737;Comment
3027;Comment/Uncomment row$R$N(Ctrl + /)
4969;Comment:
5046;Comment: 
1178;Communication Page
4925;Compute
1613;Compute Expression:
6982;Condition and Process Control
2999;Config Reset & Reboot
8670;Confirm
5879;Confirm Action
763;Confirmation $"OK$"
2808;Confirmation $"OK$" / $"Cancel$"
8447;Connection
1995;Contact Detected:
2039;Contact Enabled:
343;Contact Mode:
803;Contact Page
621;Contact Thr.:
9563;Control Mode:
4966;Conv. Belt Origin:
354;Conveyor Belt
3167;Conveyor Belt:
2888;Conveyor Position:
466;Conveyor Tracking
465;Conveyor Tracking Page
5820;Copy entry from selected row$R$N(Ctrl + C)
2165;Corner Acceleration:
928;CT Error:
2361;current balue
1992;Current Cmd Table:
3045;Current Command Table:
1258;Current CT File:
8078;Current groups and their IDs
5759;Current Kinematic: %s
3106;current position
9772;Current Position
12411;Current State
5715;Current State Online/Offline
2523;Current User:
2574;current Value
6371;Custom Name %s
1347;Cycle Time History
6009;Current Value
1023;Cut entry in selected row $R$N(Ctrl + X)
262;Cyclic Run
7395;Data Set Manager Page
7318;DataRef
4862;Dataset:
506;DD.MM.YYYY 07:07
2107;Dec:  %2.3f u/s^2
2687;Deceleration:
3135;Default all drive parameters (OS, MC, Intf, App)
715;def. Position
2473;Default
2971;Default CT-File
3230;Default CT-File:
8729;Default Kinematics
7588;Default Kinematics - 
503;Default Kinematics:
160;Default Motion Parameters
9284;Default Parameters
6349;Default on Start
6961;Default on Startup
10711;Default PArameters
5717;Default Program At Startup
6638;Default program at startup
5440;Default Speed Parameters:
747;Default User:
7301;Default Value
4350;Default Wait Timeout Length
946;Default wait timeout length
159;Defaults Fast
1059;Defaults Regular
794;Defaults Slow
961;Define Multi Axis Motion
725;Define Single Axis Motion
193;Define...
382;DELETE
9330;Delete
1418;Delete existing Label
7140;Delete File?
924;Delete History
310;Delete selected  user
113;Delete selected Row
3235;Delete selected Row$R$N(Delete)
5273;Delete selected Row $R$N(Ctrl + Delete)
11154;Delete user
2395;DELETE?
692;Dem. Pos:
287;Demand Pos.:
1029;Description
3787;Desync from Conveyor
1990;Detecting drives...
10436;Device %i
1525;Device 0:
2887;Device 1:
2460;Device 2:
822;Device 3:
1223;Device 4:
3176;Device 5:
3761;Device 6:
1765;Device 7:
47;Device:
329;Digital I/O
2411;Digital Input
832;Digital Input:
1659;Digital Inputs
5517;Digital Output X4.3
77;Digital Output:
9072;Digital Outputs
146;Direct
64;Direction
4629;direction
311;diResVal
1444;disabled
10411;Disabled
1801;Display
7175;Display Language
5152;Display language
950;Dist.: %2.3f u
4781;Drive Anschlussklemmen Image
1114;Distance:
2;diVal:
3526;DM01
1769;Double Click
4123;Double-Click Time:
8817;Download Programs
6666;Drive detection in progress...
194;Drive ID:
3841;Drive Nr.
3157;drive number
609;Drive:
4809;Edit
1622;Edit Default Motion Parameters
5623;Edit motion parameters to location A
956;Edit motion parameters to location B
1304;Edit selected row
1181;Elapsed Time:
3890;Elem. Num: %i
623;EM01
5720;Empty 1x1
10219;Empty 1x2
4543;Empty 2x1
4092;Empty 2x2
6795;Empty 3x3
4960;Enable
4046;Enable Auto-Logout
916;Enable Autohome
1313;Enable Autopower
999;Enable contact with defined force
11557;Enable DDC
3800;Enable Override
153;Enable SW Limits
7721;Enable TimeOut
2860;Enable Timeout
8957;Enable Timeout:
1279;enabled
567;Enabled
728;Enables automatic loading of Command Table file on startup
3290;Enables automatic loading of Command Table file on startup.
3057;Enables automatic loading of program file on startup
3969;Enables automatic Logout of DEVELOPER
939;Enables automatic running of Command Table on startup
2133;Enables automatic running of Program on startup
1415;Enables automatic stopping of the command table if an error occured during operation
4982;Enables automatic stopping of the program if an error occured during operation
907;End
2993;Entry Title:
5361;Equipment
485;Erase command table
3556;Erase program
2962;Err ID: %d
1586;Err LM:
4260;Err LM: 
579;Error
1513;Error & Warning Handling
3502;Error Handling
1039;Error ID:
1292;Error ID: %i
300;Error ID: %u
2712;Error Occured
1589;Error-Break
615;Error:
5389;Errors
1783;ESC
4;Events: %d
687;ErrorID:
9611;Execute
4284;Execute Command now
9001;Execute next row
5982;Execute single line
5140;Execute the following row, if a digital input is (not) set
1782;Execute the following row, if a process output fulfills a condition
3271;Execute the following row, if selected motions are finished
1572;Execute the following row, if user selects a certain input
6162;Expression
9461;F
1151;Factory Reset
8140;Factory Reset & Reboot
2245;Failed to change user level
998;Falling Edge
1208;FALSE
3253;False
782;fast
1162;File
1024;File Name:
396;File Page
117;Filename
24;Filename:
25;Filetype:
5484;Finish
867;First Part
532;FlatRobot Demo
1192;FM01
4670;Force
9420;Force    Control
162;Force 0
3223;Force Control
593;Force Grasp
318;Force Jaw 1:
2232;Force Jaw 2:
1300;Force Mot 2:
2256;Force Motor 1:
1720;Force Sensor
7018;Force Value:
377;Force Zero
255;Force:
7468;ForceControl
7490;Forced
434;Froce Jaw 1:
746;Froce Jaw1
1216;Froce Jaw1:
214;Functional Safety
1102;Functional Safety Page
6714;F_GetUndoRedoImage(G_usiPhSelectedPrgTab)
680;General
2724;F_AddSpacesBeforeString(strInputString:=GP_aEventListArchive[INDEX].strText)
923;General Page
6742;Get Filename By Index
1569;Get Int
994;Get List of Users
1926;Get Real
6817;Get String
5184;GetFileNameByIndex
1301;GetInt
7774;GetReal
1564;GetString
5716;ggf
6372;Global amplifier for command table speed.
133;GM02
332;GM50
6447;GOTO
3463;GOTO Label
7144;GOTO Label:
3500;Gripper
2060;Gripper Control
4217;Gripper Jaws
3811;Gripper Rotative
26;Gripper Settings
5923;Gripper_Only.CTdat
3984;Gripper_Only_20240612.CTdat
114;Gripping
1767;Gripping Library Parameters
1882;Gripping Library:
1034;Gripping Parameters
2410;Gripping Process
11548;Group ID
3067;Group ID:
11540;Group name
8012;G_astDataSet[INDEX].strVarName
4545;G_astProcOutSelNEW[INDEX].strName
4807;G_astProcOutsGrouped[INDEX].strGroupName
7039;G_astUserVariables[INDEX].strVarName
1335;GroupBox
2636;G_EditGripping_strRelativePrePos
1413;G_rastProgramVars[INDEX].strVarName
1828;Hand
5146;Hard Stop
1752;has finished
1833;has started
367;Help Page
5050;HIghl. Elem.: %i
4043;Highl. Elem.: %i
1161;Hold
996;Home
1060;Homed
6208;Homeing
5567;Homing
6433;Homing Direction
4567;Homing Order
555;Host IP Address:
1596;Host Port:
1280;HTTP URL:
6624;I/O
1166;I/O Page
12801;ID
845;IF
5386;IF Digital In
3029;IF Motions Done
953;IF Process Out
2056;IF the following motions are done:
2590;IF User In
2600;IF User Variable
3495;Ignore
578;Ignore Input
384;Ignore Jaws
1996;Ignore Rotary
1710;INC
4628;Ignore Rotative
1281;INCREMENT
5122;Increment
2198;Info
5800;INFO
2377;Info:
482;Information
3382;Infos
6878;Init Dataset
250;Initial Position
1877;Input / Output
2287;Input Options
2078;Input Options:
3321;Input/Output
207;Input:
168;Insert empty row above selected row
1712;Insert empty row above selected row$R$N(Ctrl + Insert)
1036;Insert empty row above selected row$R$N(shift + Insert)
3021;Insert empty row above selected row$R$N(Shift + Insert)
2844;Insert empty row above selected row $R$N(Ctrl + Insert)
4959;Insert empty row below selected row $R$N(Ctrl + Insert)
1546;Insert Instruction
4622;Insert Label
1942;Insert, edit or delete label at selected row
9834;INT
596;Instruction:
4706;int: %i
804;invalid equation
3608;Invalid Equation!
1201;Invert Axis 2:
2533;Invert Axis2:
1421;Invisible
102;IO Control Page
8924;IPv4
388;IP Address:
5470;ition:
1;iX: %d
386;iY: %d
1483;IPv4:
722;Jaw 1
44;Jaw 2
356;Jaw Mode:
2195;Jerk:
10129;Jogging Speed
1267;Jog
1186;Jog +
1180;Jog -
970;Jump to a label of a certain row
45;Kinematics
8358;LAbel
35;Kinematics Page
395;Kinematics:
4752;Label
4261;Label Name
1098;Last 100 Cycles
6446;Label Name:
9735;Label:
1755;Largest angle between two path elements still considered smooth. A smooth angle will not be rounded and no stop will happen at this point on the trajectory.
137;Last Edited
217;Last error:
6092;LEN(%s(
5357;LEN(%s)
81;Libraries:
220;Lift And Rotate
2099;Lift and Rotate
3275;Lift and Rotate Page
3599;Lift&Rotate Library:
2319;LiftAndRotate
3840;Linear
13443;LinMot Gripper Widgets
889;Linear Axis
39;LinMot Gripper
474;LinMot Gripper Page
5791;LinMot Pilot Widgets
2531;LinMot Grippers
5986;LinMot Gripping
876;LinMot Pilot Tools
4264;LinMot Tools
563;LinMot Pilot Tools Page
6537;LinMot Vision
697;LinMot Vision Page
1287;List File Names
5501;ListFileNames
3055;llll
86;lllll
572;llzz
1195;Load
2304;Load command table
5348;Load linked subprograms if available
9580;Load program
2227;Load File
11423;Load sub-program
299;Load SubProgram
1395;LoadFile
268;Location A
1077;Location A is Matrix
6912;Location B
3105;Location B is Matrix
5730;Lock
228;Logic High
229;Logic Low
2521;Login
9186;Login failed
777;Login/-out:
2654;Logout
9503;LongText
1196;Loss Detection:
12469;LREAL
1275;Lower Limit:
6029;lrResVal
5236;lrVal:
1382;MagSpring
6762;Mainpage
4583;Maintitle
94;Manage Active Libraries
1453;Manual
3272;Matrix
5022;Matrix Dim. X:
4289;Max Elements reached!
8905;max position
252;Max. characters reached!
5358;Max. elements reached!
4231;Max. Position
154;Max. smooth Angle:
6685;maxchars
6809;maxelems
993;mech. Stop
981;Mechanical
676;Mechanical Stop
3026;Menu
5448;Message
4032;mid
5119;Message:
8153;min / max Limite
3703;min / max position
7876;min / max Positionen
5143;min / max positions
8666;Min Position
3269;Min. Position
8709;Mode
2994;Mode:
3212;min position
5141;mm
4309;moderate
571;Monitoring
963;Monitoring & Debug
3529;Mot Temp: 
319;Motion
1507;Motion Parameters
152;Motor Temp.:
4769;Move a single axis
3451;Move Abs
1033;Move according to a defined blister configuration
4610;move direction
1153;Move gripper jaws
627;Move Jaws
1159;Move Mode:
1089;Move multiple axes
2928;Move Rel
3550;Move to next row after motion ...
617;Mulit-Axis Library:
546;Multi Axis
3254;Multi Axis Page
4795;MultiAx Motion
1859;Multiple Axis Library Parameters
235;Multiple Axis Parameters
1139;Multiple Axis Process
1863;Mutliple Axis System
7850;Name
515;Name:
7297;Network Page
2090;New Password
3249;New Password:
158;New User:
7239;New Username
2084;New Username:
4064;Next
1197;No command selected
5457;No Command Selected
2605;No Drive Homing
3115;No Rounding
4675;No upids found
781;No UPIDs found!
6227;Not available for Axes in Kinematics
3082;not available for axes in kinematics
8765;Number
828;Object Depth:
2066;Object Detected:
435;Object Height:
1143;Object Index:
2185;Object Orientation:
1728;Object Position:
1129;Object Radius:
1249;Object Type:
2310;Object Width:
1876;OK
1075;Old Password
3662;Old Password:
1933;Open LinVision
3182;Open Subprogram
4744;Open SubProgram
7108;Operations
258;Opposing
1699;Order
5787;Origin Pose:
1207;Origin Position & Orient.:
5443;Origin:
927;Oscilloscope Tab
2280;Override
3613;OVERRIDE
3242;Override Value
147;Ovr.
5873;Palletizing
1003;Palletizing Page
397;Parallel
259;Parameter
428;Parameter A:
249;Parameter B:
1067;Parameter R:
7028;Password
6891;Parse
2527;Password is not correct
3259;Password:
1172;Passwords are not equal
1899;Paste entry at selected row $R$N(Ctrl + V)
5468;Path
12347;Pause
3533;Pause command table
4743;Pause CT on Error
4454;Pause on Error
6656;Phys. Value:
3756;PLC-Interface
2208;Pos. Moving Direction
2122;Pos: %2.3f u
1160;Position
8282;Position   Control
403;Position Axis 1:
245;Position Axis 2:
849;Position Axis 3:
5682;Position Control
1870;Position Jaw 1:
406;Position Jaw 2:
965;Position Jaw1:
213;Position Jaw2:
536;Position Linear:
1645;Position Motor 1:
1779;Position Motor 2:
4026;Position Rotary:
3679;Position to be tracked in the CS of the conveyor belt
2561;Position to be tracked in the CS of the conveyor belt (Syncing) or in MCS (Desyncing)
3392;Position-Sensor
119;Position:
292;Positive Limit
222;Positive Limit:
4938;positive moving direction
5253;Power
4709;Power:
6331;Power all axes on/off
4634;Presets: 
2203;PR01
1350;Preset Datasets
1135;Presets:
164;Process Control
6024;Process Monitoring
1218;Process Monitoring Page
148;Process Outputs Gripping Library
2638;Process Outputs Lift And Rotate Library
1965;Process Outputs Multiple Axis Library
2710;Process Outputs Robotics Library
4259;Process Outputs Vision Cognex Library
1615;Process Outputs Vision Library
1601;Process User Variable
2129;Program
656;Program 
2391;Program >
4957;Program Behaviour
984;Program Control
8669;Program is running
369;Program Start Mode
7835;Program start mode
2856;Program System
5439;Program Variables
10450;Raw Value:
3295;Read # o. Slaves
1550;Read (0) / Write (1) Filter:
11456;Read EEprom
10853;Read UPID
10011;Refresh
773;ProgSelect Page
3629;PS01
6963;Quick Control Page
4772;Reaction on TRUE
979;Read current position
1448;Read current positions
2889;Read Digital Input
363;Ref Position Page
8327;Reference ID:
1872;Reference Type:
695;Relative
3030;Relative Pos.
7516;Relative to Target Position
6973;Remaining Time: %t[m$'m $'s$'s$']
9311;Rename
10429;Relative to Pos. Window
5250;Rename Inputs
1308;Rename Outputs
742;Rename User Variable
115;Rename User Variables
12364;Request Completion
85;Request Data
301;Request data of a detected object
5959;Request Pause
5328;RESET
1042;Reset
4999;Reset all axes and processes
6905;Reset All Drives
4698;Reset and Scan Devices
791;Reset Changes
1928;Reset changes and read values from libraries
9274;Reset Config
3247;Reset Dataset
6059;Reset Datasets
5380;Reset Master
512;Reset System:
526;Reset Values
5550;Resolve
2847;Restore
8512;Restore & Reboot
997;Rising Edge
3469;Robot
548;Robotic
7538;Robotic 
50;Robotic Page
374;Robotics
982;Robotics Library Parameters
2700;Robotics Library:
1673;Robotics Parameters
1821;Robotics Process
3054;Robotics System
3535;Rotary
1299;Rotary Axis
3193;Round Excircle
2006;Round Incircle
167;Rounding Radius:
1327;Row
5260;Rpbptics
5390;Run command table
3101;Run Control
1827;RunControl
4775;Running in process...
11941;RunningState
298;Runtime:
7045;s%
46;Sample
10458;Sample Text
3516;Sample text very long
13;Save
99;SAVE
7327;Save all programs
156;Save and write changes to libraries
3781;Save Changes
3351;Save changes and write values to libraries
8438;Save program
2510;Save command table
3362;Save program as
9118;Save selected program
1506;Scan
7638;Scrollbalken :
2014;Scrollbalken :)
4365;Scan Devices
1019;Scan to detect Objects
949;Scroll Down
2647;Scroll Up
9501;Search for UPID:
2126;Search in:
6505;SEL(bValueChanged,$'INSERT$',$'SAVE$')
9436;Sel. Elem.: %i
628;Select Command Table File from List:
227;Select Digital Input
73;Select existing File from List or enter a new Name:
2308;Select user to change or delete
5331;Selected Dataset:
9907;Selected Drive
4822;Selected Drive:
990;Selected Gripper:
1786;Selected Label:
8747;Selected UPID:
3215;Selection $"Yes$" / $"No$"
7970;Send String Command
5611;SendStrCmd
7196;Sequence
731;Set
4943;Set 1
6640;Set 2
3821;Set 3
2589;Set 4
5117;Set 5
8928;Set 6
1789;Set 7
7107;Set 8
1488;Set a digital output$R$NNOT YET IMPLEMENTED
1528;Set default Fast parameters
9262;Set default Fastparameters
3389;Set default Moderate parameters
1449;Set default regular parameters
1388;Set Default Slow Parameters
125;Set default Slow parameters
4073;Set Default Values
43;Set Digital Output
57;Set Dummy Values
2570;Set identical parameters for all axes.
2506;Set identical values for all axes
6745;Set Int
5223;Set Real
478;Set String
643;Set stroke to current position
501;Set User Variable
1171;Set Velocity
2769;Set1
4412;Set2
4178;Set3
2629;Set4
2899;Set5
4618;Set6
6154;Set7
1006;Set8
6554;SetInt
2597;SetReal
4058;SetString
814;Settings
724;Settings:
2609;Single Ax Motion
2770;Single Axis
1945;Single Axis Page
3316;Single Axis System
1156;Single Jaw 1
11368;SP2
2004;Speed
1045;Single Jaw 2
261;Single Run
1529;Speed Override
2734;slow
3957;SM01
778;SPEED
826;Speed Amplifier
4705;Speed Amplifier:
210;Standstill
4423;Start
2373;Start position X
477;Start position Y
1524;Start position Z
1868;Start position Z$$
2443;Start Program On Error
2905;Start program on error
2092;Startposition X
3489;StateDescription
2360;Status:
624;Stop command table
4184;Stop CT on Error
1602;Stop Motions
1228;Stop on Error
2571;stop one or multiple passive motions
3164;Stop the following motions:
1542;Stop. Deceleration:
1717;Stopping Deceleration:
2035;Stopping Jerk:
5828;STRING
935;Stopping Mode:
1597;Stopping Settings
3986;Stopping Settings Linear
699;Stopping Settings Rotary
5183;strCellTag:
1958;Stroke:
3530;strPlaceholder
2141;sub0
6577;sub1
7768;sub2
2476;sub3
4600;sub4
6139;subsub0
1273;subsub1
7219;subsub2
3243;subsub3
7684;subsub4
415;strResVal
418;strText
2617;strTooltip
7157;SubTitle
4701;strVal:
5068;Subprogram:
524;SubTab
709;Subtitle
6648;Switch User
3493;Sync to Conveyor
3819;Synced to Conv.:
4135;Synchronization Speed
642;Synchronous
5466;System Control Page
599;System Info
1309;System Settings:
265;Tab
698;Table Name
660;Telnet Port
582;Target Force:
6327;TargetVariable:
63;TBD
1268;TCP Parameters
257;TCP Timeout:
10677;Template
6334;Templates
3617;test 1
701;Teach/UserVar:
454;Teach/UseVar:
1993;Teach/Var:
7727;Test Execute
2326;Teach/Variable:
56;Teach:
951;Telnet port:
2534;TEST
357;Test
1936;Test123
836;Tester
334;Text
155;text
322;The command table is locked currently, as a process is running or the library is not beeing called.
497;The command table is locked currently, as a process is running, $R$Nthe library is not beeing called or the current user level prohibits changing the command table.
3203;The command table is locked currently, as a process is running, the library is$R$Nnot beeing called or the current user level prohibits changing the command table.
2869;The command table is locked currently, as a process is running, the library is not beeing called or the current user level prohibits changing the command table.
3904;The command table is locked currently, as a rocess is running or the library is not beeing called.
9457;The current program has unsaved changes
4033;The current command table has unsaved changes
693;The run control is locked currently, as the library is not beeing called.
1616;The settings are locked currently, as a process is running, the library is $R$Nnot beeing called or the current user level prohibits changing the settings.
3056;The settings are locked currently, as a process is running, the library is not beeing called or the current user level prohibits changing the settings.
3596;This is a long text to check if the line break is working.
302;Thread Checking
241;Thread Checking Page
1605;Time Out
5570;TM und Drives Image
3933;TM und Drives mit Wechselpfeilen Image
6287;Time Zone
5654;Time zone
243;Time [s]:
1785;TimeOut
4239;Timeout
8047;Timeout Time [s]:
1119;Timeout:
1742;TimeOut:
486;Title
1794;to
483;Toolbox
6456;Torque Sensor
1719;Tracking Position
2013;Trajectory
1005;Transformation Parameters
2286;Trigger
1079;Trq/Frc Lim.: +%2.1f  % /
1380;TRUE
8302;True
806;Tuning
7614;Type
2895;udint: %i
756;Undo last change to program$R$N(Ctrl + Z)
3978;Undo last change to command table$R$N(Ctrl + Z)
3477;Update Descriptions of Program
4920;Update descriptions of program
2311;Update list of users
2146;UPID
11619;UPID Actual Value:
9808;UPID t
4569;UPID Target Value:
1884;UPID Value raw:
6585;UPID Value scaled:
3709;UPID Value:
8191;Upload Programs
1012;User
4006;Use Variables
6302;Use Variables:
6718;Unique Identifier:
34;Up
780;Upper Limit:
2089;use User Variable as input
88;User Alarm
4664;User Alarm 2
1360;User Alarm Page
199;User group ID: %d
13012;User Level
9979;User Level:
488;User Management
475;User Management Page
10378;User name
1290;User Settings
4855;User Variable
400;User Variable:
2776;User Variables
2259;User:
6;User: %s
544;UserGroup: %s
10868;Userlevel
4554;Username
10939;username is already taken
852;Users
233;USERVAR1:
1055;USERVAR2:
1101;USERVAR3:
2431;UserVar:
745;V
9392;V X.X.X.X
520;V1.8.5.4
4290;Variable
4306;Value
7189;Values
1044;Var Control Page
2123;Var Name
3784;Variable Type:
6167;Variable:
959;Variables
1925;Vel:  %2.2f u/s
3951;Velocity:
11112;Verify Password
502;Vision
3132;Vision Cognex
2688;Vision Cognex Library:
6356;Vision Cognex Settings
868;Vision Library Parameters
1711;Vision Library:
183;Vision Parameters
738;Vision Process
7749;Voltage:
1724;Wait
581;Wait for
1977;Wait for a specified time
4244;Wait for an edge on a digital input
3896;Wait for Digital Input
4359;Wait for Motions
4082;Wait for Process Output
1242;Wait for the following motions to finish:
1189;Wait for User Input
5826;Wait Time
3656;Wait Time:
921;Waiting
1370;Waiting for Drive detection to finish
5606;Warning
4366;Warnings
4619;Warnings Active Time:
2935;Welcome
1912;Where is this?
661;Write Back
5783;Write digital input to variable$R$NNOT YET IMPLEMENTED
1739;Write process outputs to user variables
10854;Write UPID
1642;Write User Variable
142;Wrong Password!
2422;X
4776;X Axis
1702;X Position 1:
5899;X Position 2:
1147;X-Position:
1113;X-Stroke:
1930;X: %0.4f mm
1367;Y Axis
5067;Y Position 1:
4419;Y Position 2:
1461;Y-Position:
1446;Y-Stroke:
1295;Y:
2939;Y: %0.4f mm
1950;Y: .%0.4f mm
1325;Z Axis
5344;Z Position 1:
1883;Z-Position:
3001;Z-Stroke:
1857;Z: %0.4f mm
59;°C
