Video Tutorials
Engine configuration
You will learn how to use our LinMot Talk configuration software very quickly with the help of the numerous videos.
The basics
Download LinMot Talk
This video explains how to download the latest version of LinMot Talk to configure your LinMot drive!
Register at LinMot Talk
This video covers the procedure for logging into various LinMot drives using LinMot Talk via an Ethernet connection.
Download firmware
This video explains how to install new firmware on your LinMot drive.
Importing a configuration file
This video shows you how to import a configuration file to your drive using LinMot Talk 6.9.
Basic PID setting
Recovery after a faulty firmware installation
This video covers some troubleshooting steps that can be performed if the firmware of a LinMot drive has become corrupted.
Interpreting errors
In this video, we examine how errors in LinMot drives can be interpreted, diagnosed, and resolved.
EasySteps
EasySteps Part 1
EasySteps Part 2
EasySteps Part 3
Command table
Command table: Continuous 2-position movement
Command table: If conditions
LinMot Talk configuration – command table: If conditions
X4 interface outputs with mask
Command table: X4 interface outputs with mask
Curve movements
Time curves
Instructions for using timing curves with LinMot drives.
Force control
Force control – Part 1
Force control – Part 2
This video covers the movement commands for closed force control.
Discrete I/O
Discrete I/O Part 1: Inputs
This short video, from a series of tutorial videos produced by LinMot, guides the user through setting up discrete inputs and outputs with LinMot Talk. Part 1 focuses on the inputs.
Discrete I/O Part 2: Outputs
This short video, from a series of tutorial videos produced by LinMot, guides the user through setting up discrete inputs and outputs with LinMot Talk. Part 2 focuses on the outputs.
Features
Basic oscilloscope functions
LinMot Talk Configuration – Basic Oscilloscope Functions
Login via Ethernet/IP and other functions
This video describes the login via Ethernet/IP and is a feature that is only available on the Ethernet/IP drives E14x0, E12x0 and C1250.
Registration via RS232
This video shows how to register with a LinMot drive using the USB-RS232 converter with product number 0150-2473.
Integration
LinMot AOI/AOP integration with Rockwell and CIP Sync use with LinMot.
LinMot AOI/AOP integration: Rockwell
Rockwell Automation Part 1: New Project – Setting up a periodic new task
AOI/AOP integration
- Creating a new project
- Setting up a periodic task
- Setting up communication
Re-uploaded on December 20, 2018 with louder audio playback.
Rockwell Automation Part 2: General Maintenance Instructions
AOI/AOP integration
- General Maintenance Instructions
- On/Off
- Reference run
- Error confirmation
Re-uploaded on December 20, 2018 with louder audio playback.
Rockwell Automation Part 3: Basic Sequential Movements
AOI/AOP integration
- Basic sequential movements
Re-uploaded on December 20, 2018 with improved audio quality.
Rockwell Automation Part 4: Lifecycle Testing or Assembly Process
AOI/AOP integration
- Basic sequential movements
Re-uploaded on December 20, 2018 with improved audio quality.
Rockwell Automation Part 5: P10-70 Kinetix® K5700 Servo Drive Integration
AOI/AOP integration
- Life cycle test or assembly process
Re-uploaded on December 20, 2018 with louder audio playback.
LM_MAM Modulo Moves for Rotary Motors
This video covers the Modulo Move functions available for LinMot CIP Sync drives, which use the LM_MAM instruction. This function can be useful when programming the continuous rotation of LinMot rotary motors with absolute movements.
CIP Sync Series
CIP Sync Part 0: LinMot Drive Configuration
This video covers the configuration of LinMot C1250-CM drives for use with CIP Sync.
CIP Sync Part 1: EDS Installation and Module Creation
This video shows how to install the -CM-EDS files and create the Ethernet modules. The AOI sets for the -IP and -CM drives are separate and not compatible.
CIP Sync Part 2: Creating the virtual axes
This video shows you the parameters required for the virtual axes.
Maintenance
You can find clear maintenance instructions for LinMot motors and modules here.
CIP Sync Part 0: LinMot Drive Configuration
This video covers the configuration of LinMot C1250-CM drives for use with CIP Sync.
CIP Sync Part 1: EDS Installation and Module Creation
This video shows how to install the -CM-EDS files and create the Ethernet modules. The AOI sets for the -IP and -CM drives are separate and not compatible.
CIP Sync Part 2: Creating the virtual axes
This video shows you the parameters required for the virtual axes.
CIP Sync Part 3: Periodic Task and Initial AOI
This video covers the initial AOI and its parameters within the periodic task.
CIP Synchronization Part 4: Event-driven Task and CmdPos AOI
This video covers the parameters of the event-driven task and the configuration of the CmdPos AOI. This AOI connects the virtual and physical axes.
CIP Synchronization Part 5: Coordinated Movement Sequences
This video shows how the native motion commands control the virtual axis.
CIP Synchronization Part 6: Advanced Functions
This video covers the advanced features in the Init-AOI.
CIP Synchronization Part 7: No Coordinated Movement
This video covers the use of LM_-AOIs and the control of the physical axis using an uncoordinated movement.
CIP Synchronization Part 8: Portal Control
This video shows how to coordinate the X and X' axes of portals.
Engine design
Get to know the LinMot Designer and ensure precise design of your motion. We offer some concrete examples in our videos.
XZ Pick and Place – Part 1
This video covers the basic functions of LinMot Designer and creates a preliminary dimensioning file for the Z-axis of the system.
XZ Pick and Place – Part 2
This video refines the previously created Z-axis dimensioning and covers other advanced features of LinMot Designer.
XZ Pick and Place – Part 3
This video demonstrates the dimensioning of the X-axis of the XZ Pick and Place.
Tips and tricks for LinMot designers
Tips and tricks.
Dimensioning of a horizontal F-guide
This video briefly explains how to dimension a horizontal F-guide system from LinMot.
Dimensioning of the vertical H-guide
This video covers the dimensioning of a vertical H-guide.
Sizing of the P10-70 for the K5700 drive
This video covers the correct sizing of a P10-70 motor for use with a Rockwell Automation Allen-Bradley® Kinetix 5700 drive.
Dimensioning of linear rotary motors – Linear section
This video explains how to dimension the linear section of a linear rotary motor.
Dimensioning of linear rotary motors: Rotation section
Maintenance
You can find clear maintenance instructions for LinMot motors and modules here.
Maintenance and alignment of the LinMot H-guide
Further information on the maintenance and installation of the guide can be found in our e-catalog under the category Linear Guides.
Replacement of stator and sliding piece of the F-guide
This video shows the procedure for replacing the stator and slide in LinMot F01-48 guides.
The new edition has been published.
Look forward to inspiring success stories, exciting insights into our innovations and surprising facts about our drives – a true delight for everyone who is passionate about automation.
Slim, slimmer, LinMot
Machine builders and manufacturers are increasingly seeking dynamic yet space-saving drive solutions. Take a look at our new application report and find out how LinMot can help you!
What is skinification? – LinMot as a driving force behind new cosmetic trends
The COVID-19 pandemic has changed our lives in many ways, and the months of isolation have left a profound impact on our daily routines and our self-image.
Success stories - A showroom of smart drive solutions for APA-Tech
Selecting the right drives for a complete filling line is one of the most complex tasks in automation technology. Each individual station of the filling line, from conveying and dosing to capping and packaging, places specific demands on the drive systems.
Success stories - Gardena is moving into the future of water with LinMot
If you think of the battery-powered lawn edge shears from 1973 or the irrigation computer from the 1980s, GARDENA has always proven to be a particularly sustainable innovator.
We look forward to you
LinMot Newsletter
Stay informed about new products, technical developments, and exciting applications with the LinMot newsletter. Register here and receive all the latest news directly by email.
